TrueLife NannyTone VM3

How do I pair the parent unit with the child unit?
Both units are already paired from the factory. Switch on both units at the same time. The units will connect after power on, the units will automatically ...
Tue, 21 Feb, 2023 at 11:31 AM
How do I pair the second parent unit?
a) Press and hold the off/on button on the switched off baby unit until the the status LED flashes green. b) Then press and hold the off/on buttons on both...
Tue, 21 Feb, 2023 at 11:32 AM
What batteries can I use to power both units?
Both units have a lithium battery built-in from the factory or can be powered by the included USB-C cable from the mains.
Tue, 21 Feb, 2023 at 11:33 AM
What all affects the range of the NannyTone VM3?
The range depends on the environment where the baby monitor is used. Thick walls, reinforced concrete structures or steel structures can reduce the signal a...
Tue, 21 Feb, 2023 at 11:35 AM
Does the NannyTone VM3 audio baby monitor have two-way communication?
Yes, the NannyTone VM3 audio baby monitor has two-way communication.
Tue, 21 Feb, 2023 at 11:36 AM
How does VOX mode work?
The baby unit does not transmit sound when VOX mode is activated. The sound is activated only when it detects a noise. This mode increases the overall batte...
Tue, 21 Feb, 2023 at 11:37 AM
How do I turn on the bedside lamp on the children's unit?
The small led lamp can be switched on by triple pressing the rear button on the baby unit or by pressing the right side button on the parent unit.
Tue, 21 Feb, 2023 at 11:40 AM
How can I replace the built-in batteries in both units?
a) Parent unit 1) Unscrew the rear cover of the parent unit with a Phillips screwdriver. 2) Remove the rear cover. 3) Disconnect the old, non-functioning...
Tue, 21 Feb, 2023 at 11:53 AM